How to Resolve “Memory Card Error” From Canon IXUS 130

Canon IXUS 130 is a sophisticated digital camera that has a resolution of 14.1 megapixels. The camera is inbuilt with almost all advanced features, including fully wide-angle 4x zoom lens and motion blur technology. The IXUS camera is compatible with SDHC (Secure Digital High Capacity) and SDXC (Secure Digital Extreme Capacity) cards, with storage capacity as high as 2TB.

Since the storage memory of the cards is huge, data loss from these cards is simultaneously huge. One of the main reasons for data loss from cards is corruption of these cards. In most cases, you receive an error message after your card gets corrupted. However, an updated backup allows you to overcome card corruption. It allows you to restore data. But in case of unavailability of backup, you can use recovery software to recover data from a corrupted card.

As a practical case, you view the below error message on Canon IXUS 130 while attempting to view some previously stored photos on your SDHC card:

“Memory Card Error”

Every single photo saved in the memory card becomes inaccessible after the above error message appears. In addition, no more photo can be saved on card. In short, the card can not be read or written upon.

Cause:

The above error message that makes all the photos inaccessible is primarily caused due to corruption of card. Few reasons that are accountable for the above error message are virus infection, interrupted read/write operation, and human errors.

Resolution:

The resolution for the above error message is formatting of memory card in the camera itself. The process deletes all the previously saved data and allows you to save new data. While formatting proves a good resolution for users who do not require the old data, it becomes fatal for users, like photographers, detective agents, etc, who save critical data in their memory card. However, recovering formatted data now-a-days is an easy process. To do so, you need to use an advanced third-party Photo Recovery Software. A Image Recovery tool is readily available on the Internet by just one single click.

Posted in general | Comments Off on How to Resolve “Memory Card Error” From Canon IXUS 130

Wide Area Network (WAN)

Types and Characteristics of WANs

What is a WAN?

There are two prevailing definitions of a Wide Area Network (WAN). The book definition of a WAN is a network that spans large geographical locations, typically to interconnect multiple Local Area Networks (LANs). The practical definition of a WAN is a network that traverses a public network or commercial carrier, using one of several WAN technologies

What are its Main Components?

The main components for a WAN are routers, switches and modems. These components are described below in the hardware section.

CPE – Devices on the subscriber contracts are called customer premises equipment (CPE).
The subscriber owns the CPE or leases the CPE from the service provider. A copper or fiber cable connects the CPE to the service provider's nearest exchange or central office. This cabling is often called the local loop, or "last-mile".

DTE / DCE – Devices that put data on the local loop are called data circuit-terminating equipment, or data communications equipment (DCE). The customer devices that pass the data to the DCE are called data terminal equipment (DTE). The DCE primarily provides an interface for the DTE into the communication link on the WAN cloud.

Hardware

In a WAN you will need various types of hardware components for it to function. The typical items of hardware that you will need in a WAN are:

Router – An electronic device that connects a local area network (LAN) to a wide area network (WAN) and handles the task of routing messages between the two networks. Operates at layer 3, and makes decisions using IP addresses.

Switch – A switch is a network device that selects a path or circuit for sending a unit of data to its next destination. Operates at layer 2, and uses MAC addresses to send data to correct destination.

Modem – Short for modulator / demodulator, a modem that enables a computer to communicate with other computers over telephone lines. Operates at layer 1, where signals are converted from digital to analogue and vice versa for transmission and receiving.

Wan Standards

WANs operate within the OSI model using layer 1 and layer 2 levels. The data link layer and the physical layer. The physical layer protocols describe how to provide electrical, mechanical and functional connections to the services provided by the ISP. The data link layer defines how data is encapsulated for transmission to remote sites.

Encapsulation

Encapsulation is the wrapping of data in a particular protocol header. Remember that WANs operate at the physical layer and the data link layer of the osi model and that higher layer protocols such as IP are encapsulated when sent across the WAN link. Serial interfaces support a wide range of WAN encapsulation types, which must be manually specified. These types include SDLC, PPP, Frame delay etc. Regardless of WAN encapsulation used it must be identical on both sides of the point to point link.

Packet and Circuit Switching

Circuit switching and packet switching are both used in high-capacity networks.
The majority of switched networks today get data across the network
Through packet switching.

Circuit-switching is more reliable than packet-switching. Circuit switching is old and expensive, packet switching is more modern.

General Routing Issues

What is a Routing Protocol?

A routing protocol is a protocol that specifies how routers communicate and exchange information on a network. Each router has prior knowledge of its immediate neighbors and knows the structure of the network topology. The routers know this because the routing protocol shares this information.

Protocol

RIP (Routing Information Protocol) was one of the most commonly used protocols on internal networks. Routers use RIP to dynamically adapt changes to the network connections and communicate information about which networks routers can reach and the distance between them. RIP is sometimes said to stand for Rest in Pieces in reference to the reputation that RIP has for breaking unexpectedly and rendering a network unable to function.

Routing Algorithms

Distance Vector

This type of routing protocol requires that each router simply inform its neighbors of its routing table. The distance vector protocol is also known as the bellman-ford algorithm.

Link State

This type of routing protocol requires that each router maintain a partial map of the network. The link state algorithm is also know as Dijkstra's algorithm.

IGRP

IGRP is a type of distance vector routing protocol invented by cisco used to exchange routing data in a autonomous system. Distance vector protocols measure distances and compare routes. Routers that use distance vector must send all or a portion of their routing table in a routing update message at regular intervals to each neighbor router.

Addressing and Routing

What does routing mean?

Routing is the process of deciding how to move packets from one network to another.
The directions also known as routes can be learned by a router using a routing protocol then the information is passed from router to router along the route of the destination.

IP Address's

Every machine connected to the internet is assigned an IP address. An example of an IP address would be 192.168.0.1. IP addresses are displayed in decimal format to make it easier for humans to understand but computers communicate in binary form. The four numbers that separate an IP address are called Octets. Each position consists of eight bits. When added to together you get 32 ​​bit address. The purpose of each octet in an IP address is to create classes of IP addresses that can be assigned within a network. There are three main classes that we deal with Class A, B and C. The octets of an IP address are split into two parts Network and Host. In a class A address the first octet is the network portion, this determinates which network the computer belongs to, the last octets of the address are the hosts that belong to the network.

Sub netting

Sub netting allows you to create multiple networks within a class A, B or C address. The subnet address is the address used by your LAN. In a Class C network address you would have a subnet mask of 255.255.255.0. A subnet mask identifies which portion is network and which is host. For example 192.168.6.15 the first octet three octets are the Network address and the last octet being the host (Workstation). It is important to subnet a network because gateways need to forward packets to other LANS. By giving each NIC on the gateway an IP address and a Subnet mask it allows the gateways to route packets from LAN to LAN. Once the packet arrives at its destination, the gateway then uses the bits of the subnet portion of the IP address to decide which LAN to send the packets.

Circuit Switched Leased Lines

A circuit switched network is one that establishes a dedicated circuit (or channel) between nodes and terminals before the users may communicate. Here are some terminologies associated with a Circuit switched network.

Frame relay is a telecommunication service designed for cost-efficient data transmission between local area networks (LANs)

Basic rate interference is a service used by small business for internet connectivity. An ISDN BRI provides two 64 Kbps digital channels to the user.
Primary rate interface (PRI) is a telecommunications standard for carrying voice and data transmissions between two locations
All data and voice channels are ISDN and operate at 64kbit / s

Packet Switching

Http://www.raduniversity.com/networks/2004/PacketSwitching/main.htm – _Toc80455261

Packet switching refers to protocols in which messages are broken up into small packets before they are sent. Each packet is then transmitted over the Internet. At the destination the packages are reassembled into the original message. Packet switching main difference from Circuit Switching is that that the communication lines are not dedicated to passing messages from the source to the destination. In Packet Switching, different messages can use the same network resources within the same time period.

Http://en.wikipedia.org/wiki/Asynchronous_Transfer_Mode

Asynchronous Transfer Mode (ATM) is a cell relay, packet switching network and protocolwhich encodes data into small fixed-sized cells.

ISDN is used to carry voice, data, video and images across a telephone network. ISDN stands for integrated services Digital Network. Isdn also provides users with a 128kbps bandwidth. This is done through frame relay. Frame relay complements and provides a service between ISDN, which offers bandwidth at 128 Kbps and Asynchronous Transfer Mode which operates in somewhat similar fashion to frame relay but at speeds from 155.520 Mbps or 622.080 Mbps. Frame relay is based on the older X.25 packet switching technology and is used to transmit analogue signals such as telephone conversations.

PSDN stands for packet switched data network and is a data communication network. Packet switched networks do not establish a physical communication signal like the public telephone circuit (circuit switched network) Packets are sent on a fixed length basis and assigned with a source and a destination address. The packages then explicitly on the routers to read the address and route the packets through the network.

Mobile and Broadband Services

Digital Subscriber Line (DSL) is mainly used to bring high bandwidth connections to homes and small business's over a copper wire telephone line. This is can only be achieved if you stay within the range of the telephone exchange. DSL offers download rates of up to 6mbps allowing continuous transmission of video, audio and 3D effects. DSL is set to replace ISDN and compete with the cable modem in providing multimedia to homes. DSL works by connecting your telephone line to the telephone office over copper wires that are twisted together.

Asymmetric Digital Subscribers Line is most commonly used for home users. It provides a high download speed but a lower upload speed. Using ADSL, up to 6.1 megabits per second of data can be sent downstream and up to 640 Kbps upstream.

Http://en.wikipedia.org/wiki/Symmetric_Digital_Subscriber_Line

Symmetric Digital Subscriber Line is a digital subcriber line which runs over one pair of copper wires. The main difference between ADSL and SDSL is the difference in upload and download speeds. SDSL allows the same upstream data rate and downstream data rate as ADSL upstream can be very slow.

[Http://searchnetworking.techtarget.com/sDefinition/0],,sid7_gci558545,00.html

HDSL High bit-rate Digital Subscriber Line, one of the earliest forms of DSL, is used for wideband digital transmission within a corporate site and between the telephone company and a customer. The main characteristic of HDSL is that that provides equal bandwidth in both directions.

IDSL is a system in which data is transmitted at 128 Kbps on a regular copper telephone line from a user to a destination using digital transmission.

The Local Loop enables operators to connect directly to the consumer via copper local loops and then add their own equipment to offer broadband and other services. This process involves operators accessing local exchange buildings to connect to a network of copper lines which connect them to homes and businesses. BT is an Example of a Local Exchange. The local loop connecting the telephone exchange to most subscribers is capable of carrying frequencies well beyond the 3.4 kHz upper limit.

Benefits of using DSL

DSL can provide a virtual instantaneous transmission of voice, data and video over ordinary copper phone lines. A DSL connection can eliminate delays while waiting to download information and graphics from the Internet. It provides users with a cost effective high speed Internet connection. Another benefit is that a DSL connection is always on-line (like a LAN connection) with no waiting time for dialing or connecting.

There are now more than 10 million broadband connections in the UK. By December 2005 there were 9.792 million broadband connections in the UK and the average broadband take up rate during the three months to December was more than 70,000 per week.

Posted in general | Comments Off on Wide Area Network (WAN)

Advantages of Antispyware Programs

Much like the antivirus programs, now a days anti spyware programs also is a must if you are browsing the net. Most of the antivirus programs provide a good job by taking care of the computer viruses. However, many of them fail to detect the spyware which gets installed onto the PC when connected to the internet. This is where Anti spyware programs comes to help. They do a good job by protecting our computers by identifying the spyware and promptly remove them.

There are so many antispyware programs are available in the market. Both in the Online as well as near to your computer retail showroom. However, you have to ensure that you buy a good Anti spyware program which fulfills the requirements what it promises. Also, make sure to check that the software works on your Operating System. Most of them work on Windows Operating system; however, there is no harm in double checking the same.

Some of the characteristics of a good antispyware program is as below.

Real time scanning

Real time scanning is the heart of these type of programs. The program once installed should reside on your system tray and should be able to do a real time scan in the background. This way it should be able to identify all kinds of threats like Adware, spyware, Trojans and the harmful key loggers.

Automatic Updates

There is no point in having an Antispyware software program which does not update the spyware definitions automatically and at periodic intervals.

Customer Support

Most of the time you will not be require to call up their helpdesk as the software will work automatically provided if the operating system is compatible and all the installation prerequisites are met. However, if you run across any installation problems or some kind of bugs customer service comes in handy.

Posted in general | Comments Off on Advantages of Antispyware Programs

Medical Coding History – From Paper to Medial Coding Software

If we define medical coding as the assignment of alphanumerical characters to diagnoses, diseases, and treatments, then medical coding has been traced back to the 1600s in England with the London Bills of Mortality. A more standardized system of coding was developed for classifying death at the tail end of the 19th century. In 1893, Jacque Bertillon, a statistician, created the Bertillon Classification of Causes of Death, a system which was eventually adopted by 26 countries at the beginning of the 20th century. Shortly after the Bertillon Classification system was implemented, people began discussing the possibility of expanding the system beyond mortality as a way of tracking diseases.

By the middle of the 20th century, the World Health Organization (WHO) adopted a goal of a single global classification system for disease and mortality, entitled the International Classification of Diseases, Injuries, and Causes of Death (ICD). This classification system is updated every 10 years. The latest revision, ICD-10, is scheduled for adoption in the United States in 2013.

What started out as a small set of medical codes has evolved into a complex system that was initially standardized by the American Medical Association back in 1966 with current procedure codes (CPT) codes that are updated annually.

In the late 1970s, the Healthcare Common Procedure Coding System (HCPCS) was developed based on CPT. HCPCS has three levels of codes: Level One is the original CPT system. Level Two codes are alphanumeric and include non-physician services such as ambulances and other transportation as well as patient devices such as prosthetic devices. Level Three codes were developed as local codes, and were discontinued in 2003 in order to keep all codes relevant worldwide.

Recently, medical coding systems have been expanded to include other medical specialties. For example, there are coding systems related to disabilities, the dental field, prescription drugs, and mental health.

As the coding systems have become more complex and diverse, the need for training of medical coders has grown exponentially. Private training schools and public colleges throughout the country have developed certification programs. In order to be awarded a certificate, students must obtain a two-year degree from an accredited medical coding school and pass an exam given by the AHIMA.

Over the past 20 years, many coding processes have shifted from a paper-based system to a computer-based system using medical coding software and medical billing software. Many companies sell complete medical software-based coding solutions and myriad of products for specific medical disciplines, such as products that are specifically tailored to skilled nursing facilities, physicians, hospitals, surgery, cardiology, and more.

As medical facilities and professionals begin preparing for the conversion to ICD-10 in 2013, the need for more sophisticated medical coding software solutions and qualified medical coders will continue to grow.

CPT is a registered trademark of the American Medical Association.

Posted in general | Comments Off on Medical Coding History – From Paper to Medial Coding Software

Creative Marketing Ideas For Hardware Stores

With large nationwide chains that dominate the market, small hardware stores sometimes have a difficult time being competitive. The key is to find a unique selling proposition for your business and to capitalize on it so customers see the value in choosing you over one of the larger stores. Here are some great ways to make your business stand out.

  1. Giveaways -When your store first opens (or even if you're just looking for an extra push), offer small giveaways to your customers with their purchase. These will be tools or products they can use that are branded with your store's information-hammers, tape measures, levels, etc. When a customer is using this product and runs out of something or determinates the need to visit a hardware store, they'll see your information and immediately head your way!
  2. In-Store Classes -Hardware stores often form a bit of a culture and social atmosphere, so find ways to play this up. One great choice is to sponsor training classes and educational seminars in your store. Work with your vendors to provide information that your customers will find valuable. Even your employees can instruct these classes-anything from minor home renovation products to full-scale remodeling. List the classes you're offering that month above your cash registers with a large, visible vinyl banner which clearly-informs customers of their opportunities to expand their skills.
  3. Charity Donations -Offer your products to charity groups and organizations in-town which build or repair homes for the less-fortunate. This is great PR for your business, it makes you look more-reliable, and in return you're often able to advertise at the home-site using a banner or yard sign. When customers see that you're giving back to your community, they are more-inclined to shop with you.
  4. Ladies Night -Most hardware stores predominately-market toward men. While the majority of your customers are probably male, do not neglect the ladies. Host a "Ladies Night" at your store that offers your educational classes and even a special discount on purchases made by women. Use removable window clings to give your store a slight feminine touch. There's a huge potential market here that is somewhat-untapped, and with the right approach, female customers can dramatically affect your business.
  5. Personal Shoppers -Some customers complain that hardware or home improvement stores are overwhelming. Counter this objection by providing customers with a personal shopping service. Your employees already help customers find products daily anyway, but creating a formal program provides a revenue opportunity. Customers can have one of your employees guide them around the store and help them find exactly what they need for their project, or for even-more convenience, your employee can preselect the products they need so that when the customer arrives, all they have to Do is check out.
Posted in general | Comments Off on Creative Marketing Ideas For Hardware Stores

Corel DRAW – Best Desktop Publishing Software

Corel DRAW is a supreme supplier of graphics software, including the popular Corel DRAW program. Corel DRAW has tools that allow the user to both create and edit images. The type of desktop publishing tools that you use will depend on the type of project. For more information and assistance, use the Corel website.

Corel DRAW is the best Desktop publishing software that empowers users to create illustrations containing graphics, text and photographs. Corel has an extensive range of tools which enable the user to edit any shape or character with ease and precision, fit text to curves and create custom color separations. It is developed and marketed by Corporation of Ottawa. This tool can open files: Adobe PageMaker, Microsoft Publisher and Word, and other programs can print documents to Adobe PDF using the Writer printer driver, which such software can then open and edit every aspect of the original layout and design.

Several innovations to vector-based illustration originated with Corel: a node-edit tool that operates differently on different objects, fit text-to-path, stroke-before-fill, quick fill/stroke color selection palettes, perspective projections, mesh fills and complex gradient fills.

One of this software’s many strengths is the huge range of over 1,000 fonts that it comes with, provided in both TrueType and Postscript Type 1 format. Corel differentiates itself from its opponent in a number of ways: The first is its positioning as a graphics suite, rather than just a vector graphics program. A full range of editing tools allow the user to adjust contrast, color balance, change the format from RGB to CMYK, add special effects such as vignettes and special borders to bitmaps. Bitmaps can also be edited more extensively using Corel PhotoPaint, opening the bitmap directly from Corel and returning to the program after saving. It also allows a laser to cut out any drawings.

Expert believed it was the first of the Windows-based drawing programs and has built on this early start to become far-and-away the dominant drawing package on the PC. Its biggest strength – and its biggest potential limitation – is its all-encompassing approach. In the past this has led to accusations of unfocused bloating, but with version 7.0 Corel has addressed the criticisms with a far tighter and better rationalized program. Even so, there’s a huge range of functionality to cover.

Corel DRAW Download was originally developed for Microsoft Windows and currently runs on Windows XP, Windows Vista, and Windows 7. The current version, X5, was released on 23 February 2010.

Posted in general | Comments Off on Corel DRAW – Best Desktop Publishing Software

What Requirements Does a Dot Net Developer Need to Fulfill?

Microsoft Dot Net is a useful software development component. It provides tools and libraries to the software developers so that they can create Windows-based applications in a more efficient manner. A Dot Net developer is a software programmer who has specific skills using .Net to develop software and computer applications. For people who are in the midst of looking for developers for your projects, there are some areas you need to take note. You are advised to look for competent programmers who can really assist you to complete your tasks successfully.

First thing first, you need to be clear about the responsibilities of a .Net Developer before you start looking for suitable candidate. Seriously speaking, the programmer is required to:

• Work hand in hand with other software engineers and architects to develop a logical series of instructions referred to as programming code for the computer to communicate with the networks, applications and databases.

• Create new software applications to suit the business needs

• Modify, repair, test and enhance existing applications

After knowing what the developer is required to do, the next area we need to take into consideration is the academic qualification. In general, a programmer should have degree qualification in computer science, information technology or any related discipline. If the programmer is not a degree holder, you may take a look at his or her working experience. If the candidate has extensive experience dealing with .Net development tools, you can consider getting him or her in. Check with the candidate whether he or she is familiar with maintenance of ASP Applications, e-Commerce solution, online education and learning, social networking sites, corporate web applications, and so on.

At the same time, a good dot net developer must be competent in carrying out all the important tasks. It is a must for him or her to have the following skills in:

• Classic ASP

• Microsoft SQL 2000 / 2005

• MS Access

• JavaScript, XML, DHTML, AJAX and CSS

• VBScript and JScript

Frankly speaking, if the programmer does not have the above mentioned skills, most of the employers in the job market are not willing to hire him or her.

Besides the skills, we should also take serious consideration on the general qualities of the programmers. They should have qualities as follow:

• Good passion in work

Having great interest in work is important. The programmers should love and enjoy what they are doing.

• Good learning attitude

Learning is a continuous process. We can’t stop at certain stage. Good developers must have positive attitude in learning. They must always grab the opportunities to learn new technology so that good applications can be adapted.

• Some “intelligence”

Honestly speaking, intelligence is something very subjective. What I mean here is the “personality” of the person. Being a programmer, he or she must be smart and sensitive to respond to all changes. It is important for a programmer to be open-minded and willing to take new challenges from time to time.

Posted in general | Comments Off on What Requirements Does a Dot Net Developer Need to Fulfill?

Surviving Missing Futon Frame Hardware Nightmares

There seems to be quite a few of us who have owned a futon frame and ended up losing the connecting hardware at one time or another. I myself bought a futon from the retail store I worked in for a number of years back in the early 1990s when futons were all the rage. Maybe you purchased your futon in college, purchased it from a friend or maybe made the purchase for a family room. If you're lucky to live out your life in the same house or apartment there will never be a need to move your futon except except to a different room or location. Obtaining replacement futon frame hardware involves several steps approached in order to locate exactly what you need.

In the first place do not panic just yet. Without the hardware to attach everything back together you're in some serious trouble. However there are ways to obtain what you need. At this point we could explain the many benefits of using a small bag to contain the hardware and attach it to a part of the frame with heavy packing tape so it's easily found. Who am I kidding though? I've moved mine now about three times and each time I ended up missing a bolt, a barrel nut, a nylon roller here and there. Heck, I was lucky I had all the wood components show up at each new move let alone any hardware that happened to make it as well. Besides, is not moving your home stressful enough without having to keep track of a small bag of metal hardware among a sea of ​​furniture, clothing, dishes, toys and appliances?

Pursuing this further we must calmly step back and think for a moment. Yes, we're stressed out and fuming at either our spouse or the moving company for losing the futon hardware but we need to move past that now. To be sure the futon needs our help and we're the only ones who can do it at this point. It's time for us to go through the steps of obtaining replacement hardware and there is a specific order in which we do this to obtain the fastest results. I would suggest the following steps to start tracking down replacement hardware as soon as possible.

First – identify your futon frame.
Having worked retail, it's quite possibly the toughest situation when a customer comes into the store requiring assistance but can not identify the product to the salesperson or service individual when requesting parts. Granted you're going to have to do a little research by pulling your receipt when you bought the futon from the store and identify the model or name of the futon. If you inherited the futon, found it by the side of the road or bought it at a garage sale you're in for a tough road ahead. Fear not however as the internet can be used to help you find the design and attach a name to it for use in tracking down hardware. Be aware that there are dozens of manufacturers out there using different hardware in their frames including many that have since closed their doors. Hopefully the manufacturer of your frame is still around.

Second – speak to the retailer.
Of course if you purchased your futon frame through a local retail store it's time to head down there and see if they can track down the hardware for your frame. Bring your receipt. If you do not have a receipt, then bring an image of the futon frame with you. Hopefully the salesperson or service representative is knowledgeable about the products that they've carried in the past. Best case scenario, they either can provide you with the name of the manufacturer with contact information or have the parts on hand to get you back up and running. Worst case scenario the store you purchased it is out of business or if the store is still around they have no clue about the product anymore.

Third – search online.
Supposing we've hit the worse case scenario it's time to use the web to search for the manufacturer or the name of the style of futon you have. I'd suggest using Google, Bing or Yahoo and use the name adding the word futon to the search. If you were not able to locate a name you're going to have to become a very good spotter and sift through the many images of futon frames till you find one that is very close to what you have. Identify the name of the style and the manufacturer and then proceed to locate the manufacturer of the futon frame.

Fourth – speak to the manufacturer.
Assuming the retailer did not have parts but could identify the manufacturer for you then at least have something to go on. Perhaps you were able to locate your frame style through the search engines. Again, search online using the websites previously discussed using the name of the manufacturer. You'll likely get some online retail stores off of the search. Filter them out visually until you find a link for the manufacturer. Most do have websites, locate a contact phone number or email address and contact them for information on obtaining hardware. If you're unable to locate the manufacturer's website go ahead and contact one of the many futon stores that pop-up in the search results and email them with your issue and ask if they can either sell you hardware or point you in the right direction For finding the manufacturer in hopes of tracking down hardware.

Finally – the last resort.
If you were unable to determine the name of the futon frame or the name of the manufacturer you are indeed in a tight spot. At this point your options are limited to heading down to a hardware store and seeing if you can locate some generic parts that might get you back up and running. The problem will be in the way of connecting bolts and barrel nuts and getting the right lengths if available. I would suggest taking one of the wood arms and a stretcher rail with you to the store. Begin plugging in different bolts and nuts till you find a combination that connects correctly. You'll also need to track down connecting pins, washers and clips for the seat and back section as well as the four nylon rollers that most futon frames use on the back rest. If you're lucky these may still be attached to the backrest deck making your job a bit easier.

In conclusion we've discussed the issues presented with lost futon hardware and how to go about tracking down the hardware you need. Basically identify your frame through a receipt or spotting it online. Visit the retailer store you purchased it from and obtain parts through them if they are still open. If you purchased it privately or inherited the frame track down the manufacturer using a search engine of your choice and speak to them about ordering replacements. If you are not able to locate the manufacturer but have found stores online contact one of them to see if they can sell you hardware. If all else fails visit the local hardware store with your wood futon sections in hand and begin trying bolts and nuts till you find some that work. I sincerely hope you're able to obtain the needed hardware to get your futon frame back up and running. I wish you the best of luck to you and your futon.

Posted in general | Comments Off on Surviving Missing Futon Frame Hardware Nightmares

How To Select The Best Credit Repair Software

Credit repair software tools are available to assist both credit repair agencies and/or individual consumers with credit repair. Ideally, such repair software is user-friendly and allows the user to point and click to a series of questions, and subsequent options, to engage in the process of credit repair by challenging credit reports from the major credit bureaus.

There are many software companies to choose from. Some claim to be the “best” while others claim to have the “absolute best credit repair software on the planet.” They all provide a unique service with even more unique and distinct features. The issue that you need to consider most when selecting credit repair software is which feature set will benefit you the most. So let’s take a look at steps that will help you select the proper software package for you.

1. Try to find a product with good technical support. A proper credit repair software program behaves like other expert software. This means 24/7 technical assistance, recurring software updates, sufficient help/manual documentation, etc.

2. Your credit repair software must adhere to your personal needs. A lot of these products have numerous add-ons, bonuses and other things which you would be paying for, but may not need. For example, some vendors cater to credit professionals, so they have functionalities on client management, etc, which you don’t need as a home user. On the other hand, you might need financial tips or the automatic reminder system.

3. Keep in mind, that you may have to write letters and that you are a unique customer with a unique address, account number, social security number, and story behind your dispute, which will have to be inside the letter. This single activity will take you many hours to complete. Try to find a software that already has pre-loaded dispute letters. Then once the software has automatically extracted those disputes from the above mentioned credit report providers, this software will in turn suggest the appropriate dispute letter automatically within just a few seconds. Just imagine the hours, and amount of money you can save by just this feature alone. Most people have to hire or outsource this kind of work because their software does not do it automatically. So not only will you save time but you will also save money by not having to outsource the work.

4. Rank available packages through analyzing pros/cons/cost. Once you have a short list of possible software packages, try to rank them by analyzing the pros and cons of each, as well as comparing the cost to your budget.

5. See if there is a trial period for the software that you select. Now that you have selected which package you feel would be the best fit for you, make sure that there is a money back guarantee so that you can return it if you are not satisfied with the performance.

The more you work on your credit repair, the more that it will demand of your time. This is why it is extremely important to choose the best credit repair software available to help you automate the process as much as possible. Choosing the right software package for your needs can save you lots of time. Working with automated software can be compared to driving a car to a distant destination, versus walking there. One way will be significantly faster than the other. Repairing your credit will be much more difficult if you are not using an organized system.

Posted in general | Comments Off on How To Select The Best Credit Repair Software

Top 25 Terms All Computer Students Should Know

The following basic terminologies are considered the top 25 terms all computer students should know before they even begin their studies:

1. Bit: Binary data storage unit valued at either 1 or 0.

2. Byte: Eight data bits valued between zero and 255.

3. Word: Two data bytes or 16 data bits between zero zero and 16,535.

4. CD-ROM: A storage disk with approximately 640 megabytes of capacity.

5. CD-ROM Drive: Hardware used for reading and writing to CD-ROMs.

6. Storage Media: Magnetic devices that permanently store computer data.

7. File: Permanent storage structure for data kept on a hard drive or other permanent place.

8. Virus: Unauthorized programs that infect files or send themselves via email.

9. Vulnerability: When unauthorized access can be gained due to software errors.

10. Security Flaw: When attackers gain unauthorized system access due to a software bug.

11. Worm: Unwanted programs accessing computers via application / system vulnerabilities.

12. Hardware: Physical parts of computer (case, disk drive, monitor, microprocessor, etc.).

13. Software: Programs that run on a computer system.

14. Firmware: Software that has been permanently written into a computer.

15. ISP: Internet Service Provider.

16. BIOS: The basic input / output system computers use to interface with devices.

17. MIME: Multipurpose Internet Mail Extension.

18. Boot: What happens when a computer is turned on and beginning to run.

19. Crash: When computer software errors occur and programs fail to respond.

20. Driver: Program that understands interfaced devices like printers and video cards.

21. Network: Cables and other electrical components carrying data between computers.

22. Operating System: A computer's core software component.

23. Parallel: Sending data over more than one line simultaniously.

24. Serial: Sending data over a single line one bit at a time.

25. Protocols: Communication methods and other standard Internet / networking functions.

These are the top 25 terms all computer students should know before they even begin their technical training. Most computer students know much more. In fact, everyone who uses a computer these days should understand these terms so they can be better informed about the important tool that is so integral to our daily lives.

Posted in general | Comments Off on Top 25 Terms All Computer Students Should Know